Heating Block for Ultimaker 2 UM2 (24X12X6.5) mm

The 3D printing heat block is designed for Ultimaker 2 (UM2). It is a replacement of the standard heat block which is normally mounted on a printed UM2. The replacement heat block has the following advantages: better heat dissipation, especially on the lower part of the heat block support for all filament types 3D printed in ABS or PLA. It can be used with a wide range of 3D printing filaments, from abs to pva or nylon. This shape of this 3D printer heating block is different from normal heat block, it is with special "T" shape, which makes it easier to insert the heating block in the nozzle. This T shape has the function of easy insert, which is very convenient for users.

Specification

Size: 24mm (Width) X 12mm (Long) X 6.5mm (Height) 

Material: Aluminum

Supported Heat Cartridge: M6 X 20mm

Supported Thermistor: NTC 3950 100K

Colour: Gold

Quantity: 1 heating block

ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY.ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.

Safety Guide

►Keep away from small children.
►This products are only suitable for 3D printer use indoors.
►To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the 3D printer.
►Don't put this item into your month.
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►3D printer initial operation, Do not run the equipment Unattended state.
►When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
►To ensure the users will use the product safely and properly, please read your 3D printer manual first and follow the instructions step by step before using the product.
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.