E3D released a heat block to compliment their popular 3D printing ecosystem. The heat block can be used with the E3D-v6 to create a volcano style design. Firing up the 3D printer to produce a heat block is an inefficient process. However, with the introduction of 3D printing heat blocks Volcano style, the production process becomes significantly more efficient. 3D printing heat blocks Volcano style speeding up the HotEnd melt and extrude filament. The Volcano™ is an award winning 3D printing heat block for RepRap and other DIY 3D printers. The volcano heat break uses a very thin layer of PTFE (a lubricant) to separate the heat from the extrusion nozzle and melt chamber and can be used with PLA, ABS and other materials.
Size: 24mm (Long) X 20mm (Width) X 11mm (Height)
Supported Heat Cartridge: M6 X 20mm
Supported Thermistor: HT-NTC100K
Quantity: 1 heating block
The product in this page is only for illustration purpose, not the real product. Actual product vary due to product enhancement.
►Keep away from small children.
►This products are only suitable for 3D printer use indoors.
►To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the 3D printer.
►Don't put this item into your month.
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►3D printer initial operation, Do not run the equipment Unattended state.
►When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
►To ensure the users will use the product safely and properly, please read your 3D printer manual first and follow the instructions step by step before using the product.
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.