Heating Block E3D - V6 (23X16X12) mm

$3.00

  • e3D-V6 heating block selling the cirrus link located in Perth Western Australia
  • Now that it's getting cooler outside, you need to be looking into getting your hands on the hottest deals on e3D-V6 heating blocks! There's still time to get them before the end of the season. This is our last chance to buy and buy without restraint!
  • When heat is your need, turn to e3D-V6 heating block available now at cirrus link in Perth Western australia.
  • The e3D-V6 is on the market now in Perth Western Australia.
  • Now that it's getting cooler outside, it's time to start thinking about the best deals on 3D-V6 heating blocks in Perth Western Australia. We don't want to miss out on the best deals so now is the time to buy them. Now is the time to act without restraint!
Colour
$3.00
$3.00
Tax included. Shipping calculated at checkout.
Sorry, it's out of stock.

But we can let you know when it's back in.

The E3D V6 3D printing heat block was created with a durable aluminum. It is designed to distribute heat evenly and to transfer heat quickly throughout the whole block.The groundbreaking and innovative design of the E3D V6 3D Printing heat block features an unique and improved finned top and bottom which drastically improve the surface area and therefore, cooling. The fins and large surface area help to keep the heat on the block more consistently and provide superior thermal performance. It takes the heat you would usually be relying on just the sides of the fryer to provide and spreads it out evenly across the entire block.

 

Specification

Size: 23mm (Width) X 16mm (Long) X12mm (Height) 

Material: Aluminum

Supported Heat Cartridge: M6 X 15mm

Supported Thermistor: HT-NTC100K

Colour: Silver

Quantity: 1 heating block

The product in this page is only for illustration purpose, not the real product. Actual product vary due to product enhancement.

Safety Guide

►Keep away from small children.
►This products are only suitable for 3D printer use indoors.
►To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the 3D printer.
►Don't put this item into your month.
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►3D printer initial operation, Do not run the equipment Unattended state.
►When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
►To ensure the users will use the product safely and properly, please read your 3D printer manual first and follow the instructions step by step before using the product.
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.