Call Us: 61-406 966 431
  • Home
  • Heating Block E3D FULL IRON (22X16X11) mm ~ support 2 type thermistor
Full metal E3D 3D printing heat block which support 2 type thermistors now available in Perth.
Full metal 3D printing heat block with dual support now available in Perth.
New Full metal E3D 3D printing heat block with two type thermistors is now available in Perth.
A new machine to combat summertime heat, the New Full metal E3D 3D printing heat block with two type thermistors is now available in Perth.
SOLD OUT

Heating Block E3D FULL IRON (22X16X11) mm ~ support 2 type thermistor

  • Description
  • Reviews
Description

This E3D 3D printing Heating Block is compatible with both NTC 3950 100K and HT-NTC100K. This E3D Heating Block is used to create or maintain a temperature set point, and it can be used as a heating block for thermistor-based hot ends. It also works well as a replacement for lost or damaged parts on your hot end. Designed to provide a reliable, safe and controllable method of heating for your E3D HotEnds. NTC Thermistor for accurately controlling the HotEnd temperature. As the Connection is located in the Middle of this 3D Printing heat block, it makes the perfect printing setting for the nozzle and throat. But there is more to it than that. The Connection has a special shape that helps the filament stick to the inner wall of this block, and it will then keep printing at fast speeds.

 

Specification

Size: 22mm (Long) X 16mm (Width) X 11mm (Height) 

Material: FULL IRON

Supported Heat Cartridge: M6 X 15mm

Supported Thermistor: NTC 3950 100K and HT-NTC100K

Colour: Gold

Quantity: 1 heating block

The product in this page is only for illustration purpose, not the real product. Actual product vary due to product enhancement.

Safety Guide

►Keep away from small children.
►This products are only suitable for 3D printer use indoors.
►To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the 3D printer.
►Don't put this item into your month.
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►3D printer initial operation, Do not run the equipment Unattended state.
►When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
►To ensure the users will use the product safely and properly, please read your 3D printer manual first and follow the instructions step by step before using the product.
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

Reviews

BACK TO TOP

Someone purchsed a

Product name

info info