Shopping Cart
Total:
$0.00
SOLD OUT
Build platform Kapton Blue tape surface 48mm 5M Roll
- Availability:Out of stock
- Vendor: OpenBuild
- Description
- Reviews
Description
Introducing the 3D Printer Build platform Kapton Blue tape surface! This amazing product offers a strong instant adhesive force and fixing ability, easy to tear, can be unfolded in a controlled manner, thin, flexible, and smoothness. With its transfer resistance, solvent resistance, shrinkage resistance, and chipping resistance, this product is perfect for use with your 3D printer!
Instructions
1. Wipe down your bare build platform making sure it is clean and free of debris.
2. Trim the surface sheet to match the size of your build plate (if not already).
3. Remove the white adhesive liner and apply the surface sheet to the bare build plate. Start from one edge of the build plate and work your way to the other edge, smoothing the surface sheet with a credit card or decal applicator.
4. Re-level your surface and ensure that the nozzle height is properly set (usually between .10 – .25mm).
Tips:
To ensure the longevity of the surface sheet, use a spatula or putty knife with smooth/rounded corners. Avoid using solvents, such as acetone, to clean it.
Typically with other build surface solutions, such as blue masking tape or polyimide, a heavy deposit or “smoosh” is used on the first print layers.
Specifications
Width: 48mm
Length : 30m
Thickness: 0·13mm
Substrate: textured paper
Thickness: 013(mm)
color: blue
Long-term temperature resistance: 100(℃)
Short-term temperature resistance: 150(℃)
Instructions
Instructions
1. Wipe down your bare build platform making sure it is clean and free of debris.
2. Trim the surface sheet to match the size of your build plate (if not already).
3. Remove the white adhesive liner and apply the surface sheet to the bare build plate. Start from one edge of the build plate and work your way to the other edge, smoothing the surface sheet with a credit card or decal applicator.
4. Re-level your surface and ensure that the nozzle height is properly set (usually between .10 – .25mm).
Tips:
To ensure the longevity of the surface sheet, use a spatula or putty knife with smooth/rounded corners. Avoid using solvents, such as acetone, to clean it.
Typically with other build surface solutions, such as blue masking tape or polyimide, a heavy deposit or “smoosh” is used on the first print layers.
Reviews
