Bambu Lab H2S 3D Printer **Reserve it now!**

$300.00
Model
$300.00
$300.00
Tax included. Shipping calculated at checkout.

**Reserve your Bambu Lab H2S today! Limited stock arriving soon - secure yours before it’s gone!

Product Features

  • 340*320*340 mm³ Print Volume
  • Multi-color 3D Printing
  • Closed-loop Servo Motor Extruder
  • Optional 10W Laser and Cutting Module
  • 5μm Resolution Optical Motion Calibration
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Full Filament Path AI Detection
  • Voltage Range: 200-240V
Bambu Lab H2S 3D Printer **Reserve it now!**

$300.00

1 3

Correct Mechanical Deviations

Even with factory-set accuracy, wear is inevitable — but the Vision Encoder* delivers <50 μm motion accuracy, auto-compensating drift for lasting precision.

*need to be purchased separately

Top Speed. More Reliable Than Ever.

Bambu Lab’s proprietary PMSM (Permanent Magnet Brush-less Servo Motor) servo extrusion system delivers 67% more extrusion force, providing solid support to high flow* printing. Paired with up to 1000 mm/s toolhead speed and up to 20,000 mm/s² acceleration, your H2S can finally go full throttle — cutting your printing time by up to 30% (compared to X1C) — while maintaining top-tier quality.


*High Flow Hotend is optional equipment and can be purchased separately.

Pre-Flight Checklist by AI

Prior to each operational cycle, the H2S vision system initiates a comprehensive pre-flight checklist: Chamber Integrity Scan – Detects debris across the entire print surface. Hardware Configuration Audit – Instantly identifies build plate properties.

Real-Time Control: 20,000 Checks Per Second

Bambu Lab's proprietary PMSM servo system enables 20 kHz resistance and position sampling to dynamically modulate electromagnetic torque vectors. It stabilizes extrusion and actively detects grinding* or clogs in real time.

*may vary depending on filament type

High-precision H2S: Fast, Accurate, and Feature-Packed

The H2S elevates 3D printing with ultra-fast extrusion torque regulation at 20,000 times/sec and motion accuracy under 50 μm, ensuring razor‐sharp detail and reliability. Powered by an intelligent suite of 23 sensors and three cameras, it enables AI-driven monitoring and calibration, while auto-venting filament drying keeps materials in perfect condition. Boasting a generous 340×320×340 mm build volume, it prints up to 30% faster, all within a 65°C actively heated chamber and enhanced with optional 10W 455nm laser cutting for true all-in-one versatility.

H2S Tech Specs

Does the H2S support laser and cutting functions?

It supports 10W laser and cutting but does not support 40W laser.

Is the H2S compatible with the first-generation AMS or AMS lite?

The first-generation AMS is fully plug-and-play compatible with the H2S for multi-color printing but does not support AMS drying. Due to fundamental differences in the feeding mechanism and buffer structure, the H2S does not support AMS lite.

How many AMS 2 Pro and AMS HT units can the H2S support. and how many colors can it print?

The H2S supports up to 4 AMS 2 Pro and 8 AMS HT units, totaling 12 units with 24 filament slots, enabling up to 24-color printing.

The AMS 2 Pro connects to the printer via a 6-pin interface. What are the two remaining 4-pin interfaces on the back of the H2S printer used for?

The two 4-pin ports on the back are reserved for future expansion accessories. For example, to upgrade a non-laser version of the printer to a laser version, one of these ports can be used to connect an external air pump.

Does the H2S come with a standard USB drive, and what functions are affected without one? What are the USB drive specifications?

The package does not include a standard USB flash drive. You can still initiate printing normally without a USB, as the printer has built-in storage space to run print files. However, without a USB inserted, the following functions will be affected:
1. The recording and time-lapse photography functions can't be turned on;
2. Printing cannot be initiated through the LAN;
3. Print files cannot be sent to the machine for storage through the Bambu Studio;
4. Log files cannot be exported;
USB requirements: USB2.0 protocol or above (actual minimum write speed needs to be greater than 10MB/s), supported file formats are FAT32 and exFAT. and the printer only supports mounting one USB, and cannot connect multiple USB via a USB hub.