SUNLU Filament Dryer - FilaDryer E2

$489.00

  • A black SUNLU FilaDryer E2 by 3D Printing Perth - Cirrus Link features a digital control panel, temperature display, and holds filament spools inside. An award badge in the top right highlights its rapid drying capabilities.
  • The SUNLU FilaDryer E2 from 3D Printing Perth - Cirrus Link is a black and transparent rectangular device with a digital display, marked "SUNLU" and "110°C," featuring a dual-chamber design for efficient filament drying.
  • The SUNLU FilaDryer E2 by 3D Printing Perth - Cirrus Link is a black, transparent dual-chamber filament dryer with a digital display and "EZ 110°C" on the side, enabling rapid drying for optimal 3D printing results.
  • The SUNLU FilaDryer E2 by 3D Printing Perth - Cirrus Link is a sleek black, box-shaped device with orange light effects and a dual-chamber design for faster filament drying, shown against a dark gradient backdrop.
$489.00
$489.00
Tax included. Shipping calculated at checkout.

Product Features

  • Anneals up to 110°C for professional-grade durability and impact resistance.
  • 500W heating power delivers rapid drying - 50°C in 20 mins, 70°C in 30 mins.
  • Dual-chamber, airtight design ensures consistent heat and moisture control.
  • Fits up to two 2KG or one 3KG spool - superb for high-volume printing.
  • Compatible with most filaments and spool types (Φ1.75mm / Φ2.85mm).
SUNLU Filament Dryer - FilaDryer E2

$489.00

Superior and Efficient Annealing

Up to 110°C, it can anneal 99.99% of engineering materials on the market, allowing the materials to fulfill their potential and giving your model excellent properties such as extraordinary impact resistance and toughness. Suitable for such as ABS, ABS-CF, ASA, PC, flame retardant PC, PC-ABS, PC-PBT, CoPA, PA6-GF, PA6-CF, PA12-CF, PA612-CF, PA12 etc...

Extra Large Interior Space, Super Adaptability

The maximum compatible spool size is Φ250mm*153mm, which is suitable for most of the regular spools on the market. Tested, it can hold 2 reels of regular 1KG spools, 2 reel of regular 2KG spools or 1 reel of regular 3KG spools. (Note that the test spools are SUNLU spools, other brands of spools will have slight differences, but basically compatible, when using the need to pay attention to the size of the spool.)

Strong Compatibility, Adapts to 99% of the use scenarios

Can be applied to both engineering materials and conventional materials. Built-in preset filament settings, one click to apply the preset. The wire diameter is compatible with most of the materials on the market (Φ1.75mm, Φ2.85mm), and the Teflon tubing included with the product is Φ4*Φ3mm in size and 8cm*2 and 1m*2 in length.

SUNLU FilaDryer E2 – Ultimate Filament Dryer & Annealer for Engineering-Grade Prints

The SUNLU FilaDryer E2 is a powerful all-in-one filament drying and annealing solution, designed to unleash the full potential of engineering materials. With a max temperature of 110°C and 500W PTC heating, it delivers fast drying and superior annealing for enhanced strength and durability. Its airtight dual-chamber design ensures efficiency, while the spacious interior accommodates large spools with ease. Compatible with 99% of filaments, this unit is essential for makers demanding top-tier mechanical performance in every print.

Tech Specs

What do we need to know about SUNLU FilaDryer E2?

1. The maximum heating temperature of SUNLU FilaDryer E2 is up to 110 ℃, please carefully observe the current set parameters (such as filament type, heating temperature) is consistent with the actual need to dry the filament, to avoid too high a temperature leading to deformation of the filament (filament drying temperature, recommended product manuals or this product page of the filament spool data)

For example, if the machine is set to operate at ≥70°C, the temperature resistance of the spool of the filament you are using should be ≥70°C to avoid deformation of the spool.

2. If the product set working temperature ≥ 80 ℃, humidity detection module will be in a protective state (display humidity <10%) is a normal phenomenon, when the drying box temperature is reduced to 70 ℃, about 20H, humidity detection module automatically restore the original precision

How to anneal?

1.Select the Temperature: Determine the right temperature based on the material.
2.Control Heating Rate: Ensure the part is evenly heated.
3.Maintain Constant Temperature: Adjust the duration based on the size and material.
4.Manage Cooling: Allow for gradual cooling or use controlled cooling for the best results.

Tips for Successful Annealing!
· Precise temperature control is essential to avoid overheating.
· Test with small models first to reduce trial-and-error costs.
· Allow for shrinkage, and adjust your design accordingly.

What do we need to know about the operation of SUNLU FilaDryer E2?

When using the annealing function (MO2 mode), although some filament annealing temperatures and times are provided in the product manual for reference, it is recommended to use the filament manufacturer's recommended temperatures and times for annealing due to the different characteristics of different manufacturers' filaments.

Is there anything else I can do to make the FilaDryer more effective?

In order to ensure the drying effect, please do not open the upper cover of the drying box during the operation. During the drying process, it is recommended to open the silicone plug of the filament outlet hole (to let the internal moisture fully discharged); after the drying process, it is recommended to plug the silicone plug tightly (to avoid the entry of external moisture).

Can I touch the product while it is working?

Even though the product is protected in many places, the temperature of the outer surface of the product will be ≥55℃ if the set working temperature is ≥80℃.

To avoid burns, do not touch the enclosure/handle the oven while it is in operation (or take appropriate thermal protection measures, e.g., wear insulated gloves).